70.2 BI-HEX 16BW
£14.07
PER 100
Sheet to light steel rail (cold rolled) Rails 1.5mm to 3.5mm.
(5.5MM X 70MM 2PT)
Use for sheet to rail with up to 50mm buildup.
Complete with 16mm Bonded Washer for side wall and general use.
NYLON BI-HEX COLOUR AVAILABILITY. COLOUR CAN VARY FROM IMAGES SHOWN
Colours
Qty’s in 100’s 1 = 100, 10 = 1000 etc.
11mm standard BI-HEX nylon moulded head fasteners. All our fasteners are Moulded in the UK.
See moulded head specification link below.
Fasteners in this range are all fully threaded. See fastener specifications link below,
These fasteners have a minimum 500hr SST coating. Link below.
The length specified is the length of the fastener from under the head before moulding, Add approximately 8mm to the length of the fastener for the total length including the moulded head.
Colours please see our colour availability page for a *full list of colours. Do not rely on colour matching from the colours on the images as they will vary due to reproduction and screen resolution.
*We do add colours and the list may not be complete
Use a purpose made screwgun for installation. Cordless drivers and drill drivers are ideal with torque set fairly high on a high speed and in driver mode. Please note: Impact drivers should not be used under any circumstance and automatically voids any warranties.
Figures throughout will be ultimate test results with no safety factors.
RELATED PRODUCTS
22.1 BI-HEX 16BW
STITCHERS
£11.39 PER 100
9X3BUTYL
LAP MASTICS
£4.43 PER 15M ROLL
11mm BI-HEX
DRIVE SOCKET
£5.40 EACH
LP22.1
STITCHERS
