Roofing and Cladding Screws and accessories
Teepee Products Ltd Telephone 0118 9757776
A leading manufacturer of the nylon Bi-hex cladding screw and home of the tek screw since 1994
www.claddingscrews.co.uk
SCREW SPECIFICATIONS
Please note: All figures throughout are ultimate failure loads without safety factors.
All sizes in mm
Material-coating, Tensile-Shear-Torsional strengths, Pullout figures-Resistance values
DRAWING 1 T17 (25.2), T15 (32.2), T11 (38.2), T157 (50.2), T38 (70.2)
DRAWING 2 T24 (38.5), T26 (51.5), T27 (67.5), T33 (76.5), T601 (100.5)
DRAWING 3 T16 (25.S), T39 (32.S), T39L (45.S)
DRAWING 4 T39EL (75.S)
DRAWING 5 T615 (22.1)
DRAWING 6 T615B (MS25.1)
DRAWING 7 HT65, HT85, HT100, HT115, HT130, HT150, HT170, HT190, HT220
DRAWING 8 HTL80, HTL100, HTL125, HTL150, HTL175, HTL200, HTL225
DRAWING 1 T17 (25.2), T15 (32.2), T11 (38.2), T157 (50.2), T38 (70.2)
TEEPEE PRODUCTS TK-HWHB-12000
LIGHT SECTION SHEET TO RAIL
|
CODE |
SIZE | THREAD |
| T17 (25.2) | 5.5X25±0.8 | FULLY |
| T15 (32.2) | 5.5X32±1.2 | FULLY |
| T11 (38.2) | 5.5X38±1.2 | FULLY |
| T157 (50.2) | 5.5X50±1.5 | FULLY |
| T38 (70.2) | 5.5X70±1.5 | FULLY |
|
MATERIAL |
C-1022 |
|
COATING |
RUSPERT 500HR SST |
| MECHANICAL PROPERTIES | |
| TENSILE STRENGTH | 12.9kN |
| SHEAR STRENGTH | 8.96kN |
| TORSIONAL STRENGTH | 13.5Nm |
|
PULLOUT RESULTS |
|
| 1.6mm STEEL | 4kN |
| 2.0mm STEEL | 5.32kN |
| 2.5mm STEEL | 6.78kN |
| 3.0mm STEEL | 7.96kN |
| 3.5mm STEEL | 10.68kN |
DRAWING 2 T24 (38.5), T26 (51.5), T27 (67.5), T33 (76.5), T601 (100.5)
TEEPEE PRODUCTS TK-HWHMC-12000(P5)
HEAVY SECTION SHEET TO RAIL
|
CODE |
SIZE |
THREAD |
|
T24 (38.5) |
5.5X38±1.2 |
FULLY |
|
TT26 (51.5) |
5.5X51±1.5 |
FULLY |
|
T27 (67.5) |
5.5X67±1.5 |
FULLY |
|
T33 (76.5) |
5.5X76±1.5 |
FULLY |
|
T601 (100.5) |
5.5X100±1.5 |
FULLY |
|
MATERIAL |
C-1022 |
|
COATING |
RUSPERT 500HR SST |
| MECHANICAL PROPERTIES | |
| TENSILE STRENGTH | 13.9kN |
| SHEAR STRENGTH | 9.3kN |
| TORSIONAL STRENGTH | 14.5Nm |
|
PULLOUT RESULTS |
|
| 3.5mm STEEL | 8.2kN |
| 6.0mm STEEL | *13.9kN |
| Above 6.0mm Steel limiting factor is Tensile strength | |
DRAWING 3 T16 (25.S), T39 (32.S), T39L (45.S)
TEEPEE PRODUCTS T17-HWHA-14000
GASH PT SHEET TO TIMBER
|
CODE |
SIZE |
THREAD |
|
T16 (25.S) |
6.3X25±1.2 |
FULLY |
|
T39 (32.S) |
6.3X32±1.5 |
FULLY |
|
T39L (45.S) |
6.3X45±1.5 |
FULLY |
|
MATERIAL |
C-1022 |
|
COATING |
RUSPERT 500HR SST |
|
MECHANICAL PROPERTIES |
|
|
TENSILE STRENGTH |
17.4kN |
|
SHEAR STRENGTH |
12.5kN |
|
TORSIONAL STRENGTH |
19.4Nm |
|
PULLOUT RESULTS In tanalised construction grade timber |
|
|
T16 (25.S) |
1.8kN |
|
T39 (32.S) |
2.4kN |
|
T39L (45.S) |
3.9kN |
DRAWING 4 T39EL (75.S)
TEEPEE PRODUCTS T17-HWHA-14075
GASH PT SHEET TO TIMBER
|
CODE |
SIZE |
THREAD |
|
T39EL (75.S) |
6.3X75±1.5 |
49-51 |
|
MATERIAL |
C-1022 |
|
COATING |
RUSPERT 500HR SST |
|
MECHANICAL PROPERTIES |
|
|
TENSILE STRENGTH |
17.4kN |
|
SHEAR STRENGTH |
12.5kN |
|
TORSIONAL STRENGTH |
19.4Nm |
|
PULLOUT RESULTS In tanalised construction grade timber |
|
|
40mm EMBEDMENT |
3.7kN |
|
50mm (MAX) EMBEDMENT |
4.6kN |
DRAWING 5 T615 (22.1)
TEEPEE PRODUCTS SK-HWHB-14022(P1)
SHEET TO SHEET REDUCED POINT STITCHER
|
CODE |
SIZE |
THREAD |
|
T615 (22.1) |
6.3X22±0.8 |
FULLY |
|
MATERIAL |
C-1022 |
|
COATING |
RUSPERT 500HR SST |
|
MECHANICAL PROPERTIES *At 5mm from washer face use same figures as drawing 1 NOT TESTED |
|
|
TENSILE STRENGTH |
*12.9kN |
|
SHEAR STRENGTH |
*8.96kN |
|
TORSIONAL STRENGTH |
*13.5Nm |
|
PULLOUT RESULTS “Pull apart” value |
|
|
0.5mm SHEET |
1.1kN |
|
0.7mm SHEET |
1.4kN |
DRAWING 6 T615B (MS25.1)
TEEPEE PRODUCTS SK-HWHA-16025(P1)
SHEET TO SHEET MEGA STITCHER/REPAIR SCREW
|
CODE |
SIZE |
THREAD |
|
T615B (MS25.1) |
M8X25±0.8 |
FULLY |
|
MATERIAL |
C-1022 |
|
COATING |
RUSPERT 500HR SST |
|
MECHANICAL PROPERTIES NOT TESTED |
|
| TENSILE STRENGTH | >15kN |
| SHEAR STRENGTH | >12kN |
| TORSIONAL STRENGTH | >16Nm |
|
PULLOUT RESULTS “Pull apart” value NOT TESTED |
|
|
0.5mm SHEET |
>2kN |
DRAWING 7 HT65, HT85, HT100, HT115, HT130, HT150, HT170, HT190, HT220
TEEPEE PRODUCTS RK-HWHBB-12000
HIGH THREAD LIGHT SECTION SHEET TO STEEL RAIL AND TIMBER
|
CODE |
SIZE |
THREAD |
|
HT65 |
5.5/6.3X65±1.5 |
39-41 |
|
HT85 |
5.5/6.3X85±1.5 |
49-51 |
|
HT100 |
5.5/6.3X100±1.5 |
54-56 |
|
HT115 |
5.5/6.3X115±1.5 |
59-61 |
|
HT130 |
5.5/6.3X130±1.5 |
74-76 |
|
HT150 |
5.5/6.3X150±1.5 |
74-76 |
|
HT170 |
5.5/6.3X170±1.5 |
74-76 |
|
HT190 |
5.5/6.3X190±1.5 |
74-76 |
|
HT220 |
5.5/6.3X220±1.5 |
74-76 |
|
MATERIAL |
C-1022 |
|
COATING |
RUSPERT 500HR SST |
|
MECHANICAL PROPERTIES |
|
|
TENSILE STRENGTH |
12.9kN |
|
SHEAR STRENGTH |
8.96kN |
|
TORSIONAL STRENGTH |
13.5Nm |
|
PULLOUT RESULTS |
|
|
1.6mm STEEL |
4kN |
|
2.0mm STEEL |
5.32kN |
|
2.5mm STEEL |
6.78kN |
|
3.0mm STEEL |
7.96kN |
|
3.5mm STEEL |
10.68kN |
|
RESISTANCE VALUE HIGH THREAD STITCHING VALUE TO PREVENT SHEET SEPERATING FROM WASHER EXCLUDING INSULATION RESISTANCE |
|
|
0.5mm SHEET |
1.1kN |
|
0.7mm SHEET |
1.4kN |
|
PULLOUT RESULTS IN TIMBER In tanalised construction grade timber |
|
|
40mm EMBEDMENT |
2.9kN |
|
45mm EMBEDMENT MINIMUM RECOMMENDED |
3.3kN |
|
50mm EMBEDMENT |
3.8kN |
DRAWING 8 HTL80, HTL100, HTL125, HTL150, HTL175, HTL200, HTL225
TEEPEE PRODUCTS RK-HWHBM-12000(P5)
HIGH THREAD HEAVY SECTION SHEET TO HEAVY STEEL RAIL
|
CODE |
SIZE | THREAD |
| HTL80 | 5.5/6.3X80±1.5 | 49-51 |
| HTL100 | 5.5/6.3X100±1.5 | 59-61 |
| HTL125 | 5.5/6.3X125±1.5 | 74-76 |
| HTL150 | 5.5/6.3X150±1.5 | 74-76 |
| HTL175 | 5.5/6.3X175±1.5 | 74-76 |
| HTL200 | 5.5/6.3X200±1.5 | 74-76 |
| HTL225 | 5.5/6.3X225±1.5 | 74-76 |
|
MATERIAL |
C-1022 |
|
COATING |
RUSPERT 500HR SST |
|
MECHANICAL PROPERTIES |
|
|
TENSILE STRENGTH |
13.9kN |
|
SHEAR STRENGTH |
9.3kN |
|
TORSIONAL STRENGTH |
14.5Nm |
|
PULLOUT RESULTS |
|
|
3.5mm STEEL |
8.2kN |
|
6.0mm STEEL |
*13.9kN |
|
Above 6.0mm Steel limiting factor is Tensile strength |
|
|
RESISTANCE VALUE HIGH THREAD STITCHING VALUE TO PREVENT SHEET SEPERATING FROM WASHER EXCLUDING INSULATION RESISTANCE |
|
|
0.5mm SHEET |
1.1kN |
|
0.7mm SHEET |
1.4kN |
